Club Meeting Minutes – 2.17.2024
25 attending
- Hal started off by passing around the roster and the signup sheet for the Wednesday night net and encouraged all licensed hams to sign up.
- This was followed by introductions
- – Treasurer Report:
- Larry then did his monthly treasury report. $283 was deposited. $129.25 for food and sundry for Winter Field Day. Bill was reimbursed $35 for the shelves in the Go-Box which leaves us with a total of $2112.24
- – Winter Field Day Update:
- Hal thanked everyone who participated in Winter Field Day, especially the people who helped with the setup and the tear down.
- Hal introduced the Attaboy award tradition which would have been given to David Russ had he been here today.
- He is not a member of the club yet. He showed up in December and offered to cook for the club on Winter Field Day.
- He was there before anyone got there and stood outside all day on a cold miserable day and cooked for us until 21:00 that evening.
- The food was exceptional. The club bought the food and he cooked it.
- There were 4 operators which were Kirk, Curtis and Jake. 1 didn’t log in.
- We had 105 contacts over 5 bands which we received multipliers for.
- The logging software used was N3FJP – https://www.n3fjp.com/
- We had a good time and we worked more bands than last year and we made about the same contacts that we did last year. (Nota bene: Last year we had 195 contacts for a total of 1380 points made possible by Phillip’s multiplier for CW contacts)
- The weather was actually better than last year when it was rainy, cold, wet and windy.
- We had discussed buying coax at a previous meeting but decided to table it until after Winter Field Day.
- Hal asked Larry, Kirk and Raymond to be on a committee to head up the purchase of the coax.
- Hal prompted Kirk for a cost of about 100 ft of coax.
- Kirk said that it would depend on the brand.
- Hal expressed that he preferred more flexible cable which would be more practical.
- Kirk recommended the LMR-400 for up to 200 ft, though he didn’t recommend buying a single 200 ft. length. He believes it would be $1.20 per ft with connectors.
- Larry also wanted to include a bulkhead connector for the airport terminal.
- Ernie thought a number of 50 footers would be ideal and extending it by using barrel connectors if a longer piece is needed. There is minimal loss in the connectors. It’s also easier to store.
- Hal pointed out that we used about 150ft of the 200ft spool at last year’s Field Day from the trailer to the field where the antenna was located behind the hangars.
- Ernie pointed out that we have plans to do local demonstrations.
- Larry believes that 100ft from the side of the building at the airport terminal would be enough, though some jumpers would also be needed from the Go-Box to the wall.
- Larry threw out some ideas for coax lengths, but Hal told him that it was up to him and the cable committee to come to a decision on what to buy.
- Phillip chimed in with the fact that a connector would only lose 1/10th of a dB, so you could have 10 connectors and only lose 1 dB.
- Ernie opined that the club has the equipment to measure the loss for various cable configurations.
- – FD/WFD Debrief – Good, Bad and New Ideas
- Hal went to the white board and wrote down 3 headings. Good – Bad – New.
- Under the Good heading the following points were agreed upon: More than enough people showed up to setup the station – The tent stakes were superb (now painted orange) – Lawn staples work out well in the wet ground – Go-Box worked out well. End-Fed gave us an extra band (80m) – Being at Terminal – Social aspect – Contact goal of 100 –
- Under the Bad heading the following points were agreed upon: The connection between coax and plate on DX Commander is subject to breaking.
- Hal mentioned that there are some pictures on Facebook
- We weren’t able to get the trailer this time due to Tully’s tight schedule.
- Rod mentioned that we should look at battery backup and solar.
- Ernie said that if the connection between the 239 and the conduction plate breaks then we’re up the creek.
- Larry suggested we make 2 or 3 in case we break one.
- Ernie stated that we need a hex beam
- Hal said that if the club agrees to it when Ernie is president then we’ll get one!
- Curtis thought that we should have a schedule to extend our contact goal
- Larry added that we should include a digital format for Summer Field Day which would afford us some more points and also help people who want to learn a digital format like FT8. We don’t operate continuously for 24 hours so an hour could be taken to operate in a digital format to get the extra points. He believes it would be better than running 2 radios.
- Hal recommended going to digital with training before the next event and if there is a lot of interest he suggested we could then look at 2 stations.
- Billy said that we could do a demo during the solar eclipse in April.
- Bill then had an idea of having a radio event. Apparently there is an event going on where some people are investigating the effects on propagation during a solar eclipse. We could be involved in that process by setting up a station.
- Hal has the information on the group which might get media involved and give us more exposure.
- Billy brought up the issue of being totally independent on the next Summer Field Day where we would not depend on commercial power. In a true disaster there won’t be any power. We need to be able to run for 24 hours without any help.
- Bill mentioned that he has a major solar generator and solar panels and could set them up and show the viability of running an HF radio for 2 days on solar and battery.
- Jeff added that we could use Lithium batteries and put them in line with your power supply for the radio.
- Larry pointed out that we also get extra points for solar.
- Kirk contended that Field Day is good training for being on the radio as well as logging. There is plenty of opportunity for new hams to get on the radio since it isn’t manned continuously throughout the 24 hour period. It’s a good way for new people to get over their mic shyness.
- Hal specified that his main goal for these events is to get new people on the air which is what he saw during this Field Day, which was very gratifying.
- Bill expressed concern regarding getting a new generation of operators involved.
- David Johnson questioned whether he could have gotten on the radio having passed the test but not having received his license yet, to which Hal replied he absolutely could have.
- Curtis explained that he could have operated under the club call sign.
- Bill wondered how we can get the knowledge that new hams need into an easily digestible format.
- Ernie added that there are also a number of people who don’t know how to operate the club radio.
- Rod shared information regarding “Get on the Air” or GOTA.
- Jeff spoke briefly on winlink training which is available every Thursday at https://emcomm-training.org/Winlink_Thursdays.html
- Hal asked Jeff to give it to Curtis who will put it up on Facebook.
- Hal mentioned that Bill has been working on a program that will provide Baofeng’s to new hams. Hal had asked Bill to contact Howard Pierpont.
- Bill talked about his discussion with Howard and that they had a lot in common. Howard had mentioned an incident in Colorado that affected them when a large area of Colorado lost communication where nobody could talk to each other. He realized that this is not a governmental issue to deal with but an issue as Americans to deal with. That’s when he started a company called The Institute for Preparedness and Resilience (https://disasters.org). They team up with ham clubs like ours. Howard sent Bill a memorandum of understanding which Bill has signed and sent back. They have already given us 6 Baofeng UV-5Rs, so if you get your training and get a ham license the club can loan you an HT. Captain Ernie is developing a program where you can choose to have it programmed for you or go through a training program and learn how to program it yourself using “Chirp”. We would have common communications plan (yet to be determined) for WCARA where all the channels would have a pre-allocated function where e.g. channel 1 would be the Purley repeater, channel 2 would be the Quitman repeater and channel 3 would be for our annual Christmas parade. In other words channel 1 would be used for our Wednesday night net and channel 4 would be for the “Elmer net” which follows directly after the Wednesday night net. The radios have been inventoried and are ready to go. We just need a new generation excited and into the classes and licensed and loan the radios out to the next generation of hams.
- Larry questioned whether we should add them to our insurance program, to which some discussion ensued and finally decided that at this point it wouldn’t be worth it but maybe sometime in the future when we add more radios to our inventory.
- Bill said there would be a club template on Chirp that can be downloaded. If the comm. plan changes the template will be updated and everyone will be notified and will be able to download the update. It’s just to get us all on the same page.
- The national call channel will also be added so we’re all speaking the same language
- Linda asked if the radios will have a WCARA burned onto the ham radio.
- Bill said that he has an engraver and will engrave “WCARA” on the radio and battery.
- The new user will sign an agreement when signing out a radio. It will have an end date when the radio needs to be returned.
- Jake also suggested engraving the phone # on the radio.
- When a radio is returned it will have an update template downloaded to it.
- Margaret asked what the ETA is regarding creating the template.
- Bill said that he has a good idea what should be on the plan but said that he would hand out a form later where the members can express what they would like to see on the plan; we could essentially integrate all of it. It would just be down to the limitation of the # of channels on the radio. (According to Baofeng’s manual the max 128 channels) https://baofengtech.com/wp-content/uploads/2020/10/BaoFeng_UV-5R_Manual.pdf
- There was some discussion regarding putting GMRS or FRS channels on the radio, but Bill said that there is a legal issue, so it would be up to the individual to program those frequencies depending on what license each individual has.
- The memorandum that Bill signed is an understanding between DERA and WCARA and strictly for a loaner program. The radios are not for sale. They are $18.50 on Amazon. You can’t get cheaper than that.
- These radios are now the property of WCARA.
- – Website update:
- Hal got an email from Tom the other day in response to Hal’s email saying that he hadn’t touched it yet. He has tasked Jeff and Curtis to work with Tom to see where we are going. Hal asked them to contact Tom.
- Curtis asked Raymond to send his login for WordPress.
- The 50/50 Raffle was then picked by Chet Adair and won by Chet Adair!
- – Club Call sign:
- Curtis said that it has been brought up to change the club call sign since Q is difficult on voice. It has been suggested that we stay away from Q and Z. They are difficult to hear on the other end of the radio especially when conditions are difficult. We had an impromptu meeting at Speakeasy and everyone had a say in offering up suggestions to whether we want a 1×2, 1×3, 2×2, 2×1 etc. Curtis said he would compile a list with all the suggestions and then finalize and prioritize the list, put it on the official form and send it off and see what gets approved. It just depends on what is available. The radioqth website may say a call sign is available but whether it is issued or not, Curtis doesn’t believe it checks that, so we would have to research it to make sure it’s available.
- Ernie liked WW5W as a club call sign.
- Curtis gave some clarification to David, a new member, as to what a 1×2, 2×2 etc means.
- Curtis mentioned that a lot of clubs like DX as a suffix. He asked everyone to submit suggestions on a card in any call sign format. There is a website at www.radioqth.net where you can see the availability of a call sign.
- Bill gave an example of WC5TX though Hal said it isn’t available.
- Phillip talked about some characters being more difficult on CW.
- Curtis said the top 5 will be submitted. We won’t necessarily get the call sign we want.
- Phillip commented that the next newsletter will have a Buy, Sell or Trade section. Only amateur radio related items. No boats, cars or real estate will be allowed. The posting will only last one issue.
- Phillip pondered whether we need a disclaimer to which Hal said the disclaimer could say that “The publisher reserves the right to refuse”.
- Hal credited Phillip and Kay for doing a fantastic job on the latest newsletter.
- Bill – Club Activities.
- Bill asked us to bear with him since he is new to the position and said that in his view an active club is a happy club. An active club is a growing club. The more events we can provide that they enjoy the more excited they will be. He gave the example of his wife Linda who loves to go to the Saturday morning Speakeasy gathering. She likes to go to learn more about radios and says it’s not just for men.
- Bill said he would like the members input on what they would like for events. He put down some thoughts that he had for events that we could do, but it’s only a microcosm of what’s available. He mentioned a road trip to Kilgore Radio Communications Museum to see how radios started in East Texas.
- Bill mentioned that we could help new hams build their first antenna and help them grow as a ham.
- We can also get into how antennas work. How does a coil work and make it electrically longer for example.
- Linda would like to do a fox hunt.
- Rod explained that is a way to zero in on a low wattage transmitter. There are times when you need to find the physical location of a transmitter. It could perhaps be a rogue transmitter who interferes with our net. The idea would be to find his location and file a complaint.
- Phillip added that at a previous club that he was a member of, that it helped them locate and resolve interference on their repeater.
- Some other ideas Bill mentioned would be building antennas as a club like a measuring tape antenna for your handheld so you would have a yagi antenna. Then we could teach you the skill to find that rogue transmitter in 1 or 2 hours.
- Larry has built his own handheld antenna and has enough material left over which he can supply so everyone can build their own antenna. Larry believes it would take a day to build a 6m dipole.
- Billy suggested building a 2m which would take less time.
- Bill requested people circle what they would like to be involved with on the handout sheet.
- He would also like to see events which would involve younger people, since that is the future of ham radio.
- Bill said that this is a brand new program that we need to design as a club, when, where and how often we get together. Bill said his job is to organize it and our job is to determine what we want to do.
- – Rains Club Hamfest is on April 27th and they have asked for our involvement. Larry has all the details.
- Larry said it is basically the same as what we have done in the past.
- They are just asking us to help handle the traffic for parking and towing. Don’t know if they’re charging admission this year. Last year they charged $5.
- If you participate you would need to be there at 05:30. It’s not hard work and you get to meet a lot of new hams.
- They also sell donuts and drinks.
- It takes 4-5 people
- It’s at the fairgrounds in Emory behind the Valero station at the junction of 69 and 19. The entrance is on 69 on the right side of the station.
- Charlie said that they are encouraging other vendors that don’t have to be ham related.
- Charlie also said there will be a testing session.
- Larry intimated that it is a great place to buy used gear.
- Hal added that he came away with 3 prizes. Dual band radio and an MFJ clock.
- Larry believes we would need 6 people. 4 people need to be there at 05:30
- Hal said that Raymond is in charge of all the official correspondence
- Hal talked about an article we received from another club in Irving that is having a hamfest on March 2nd between 08:00 – 14:00 with admission of $5.00. There will be over 50 sellers, 70 vendor tables and numerous ham related items. There have been between 350 – 400 that have showed up in recent years. The event will be at Betcha Bingo, 2420 W. Irving Blvd, Irving, TX 75061.
- – Bill stated that last year was the 2nd Go Kit Challenge – see Tank Radio on Youtube https://www.youtube.com/@TankRadio. They basically get together and show off their go kits and how they are packed to deploy in the field. Bill said that all his equipment is deployable. His Go-Boxes are ready to go and he can tear down the antennas in 5 minutes. This is a chance to go and see what other people are doing. How they wire them and why bonding is so important for noise and feedback loops. How they ground in the field. How they deploy their antennas etc..
- This year it falls on next month’s meeting date on March 16th. It’s in Lewisville south of Denton. Double Tree Ranch Park in Highland Village Texas. There was about 20 people setup last year.
- Bill said he would like to go and pick their brains. It’s between 08:00 – 12:00.
- Bill pointed out that we could take the club go-kit and enter to win a prize for the club.
- Rod suggested putting on the calendar for next year as a club excursion.
- Curtis put forward the possibility of some going and representing our club.
- Curtis commented that he came across a diesel power generator on Craig’s list for $3,000 and added that this would be something for the club to dream for. We could attach one to a trailer that we could use on Field Days.
- Larry says he is personally keeping an eye open for a good deal on one and would be happy to lend it to the club.
- – ICOM 7300 Training:
- Hal asked Ernie to say a few words regarding ICOM 7300 training which he would be in charge of.
- Ernie opined that there are a lot of features on the ICOM that you’re better being showed how to use. He is of the opinion that some demos and hands on experience is what we need. We may be able to put the ICOM screen on a bigger monitor. He would like to show how to exploit the spectrum scope and change filtering. There are a lot of functions to get accustomed to. He pointed out that Cliff’s radio has all the features of a modern radio but all the functions are accessed through knobs and buttons as opposed to the ICOM which uses menus and touch screens. So this is how you would learn more about HF operations and the HF rig. This gives you a nice foundation if you would like to buy an ICOM 7300 or some other radio. The general idea is to hook up the radio here and connect it to an antenna and review these things.
- Rod recommended about ½ hour or 1 hour before the meeting
- Bill suggested using his portable antenna
- Phillip said he has a dipole that can be put up quickly
- Hal told everyone to coordinate through Ernie
- Billy said he has a 30ft end fed
- Larry P said he knows 3 – 5 people that he knows who would like to take the tech test but wanted to know if there was going to be a class, so Hal asked Ernie about setting up a Tech class.
- Ernie suggested 2 Saturdays.
- Curtis said he would also be available to help
- Hal suggested March 2nd and 9th which Ernie agreed to.
- Ernie pointed out that it would also be a refresher course for anyone wishing to come.
- The tech class will be at 08:00 on the first 2 Saturdays in March, i.e. 2nd and 9th.
- Charlie asked us to pass this information onto the Rains Group as there might be some interested people there.
- Hal asked Raymond to pass this information onto David Frost at Rains County.
- Curtis said he would put an event on Facebook for it.
- Larry mentioned that he had received a new tower agreement from John Newman our ARES coordinator for the district that they use. It’s only 2 pages long. He is working with Tully. In their case they were able to get the county to supply 2 feed lines and 2 antennas, though it’s not likely that we’ll get that. He wants to make it clear in the agreement who’s doing what and who’s supplying what equipment. It is not a rental agreement, it is a tower use agreement. He would like to get it completed with Tully’s help and turned in to the legal department as quickly as possible. If we don’t, Larry doesn’t believe they’ll take action on it. It’s down to what the county is willing to pay for.
- Larry also talked about not getting anywhere with regard to getting into the Quitman STEM program. Larry asked if the club would support approaching Yantis? It’s a small school but still in the county. It would require the same amount of effort to get a club started or help kids get their license or work with them occasionally with their STEM program.
- Hal had considered doing this for Winnsboro too and asked for input and a few people voiced that they believed it would be a good idea.
- Larry said that he knows the principal and will look further into it.
- Larry P said that he is the emergency preparedness coordinator for the Church of Jesus Christ and they are having a seminar next Saturday at 18:00 on meal in a jar, i.e. dehydrated meal in a jar where you would just add water. Then on March 16th they are having emergency medical training.
- The East Texas Food Bank has food giveaways the 3rd Wednesday of every month at the stadium where you can volunteer. Come by at 09:00 to help or at 10:00 to pick up food for you or someone else. They also do it the last Thursday of every month in Mineola.
- It’s located on the right on 154 right before the animal hospital after the high school.
- Adjourned at 10:55
